If this issue occurs, toggle the Windows HDR setting. The mouse cursor will be sluggish for a few seconds before returning to normal operation. It is intended only for video upscaling or for games which do not run with a scaling resolution unless the same Image Scaling resolution is applied on the desktop.
If the previous instructions do not work, upgrade to the hotfix driver While installing the graphics driver allows the system to properly recognize the chipset and the card manufacturer, updating the video driver can bring about various changes.
It can improve the overall graphics experience and performance in either games or various engineering software applications, include support for newly developed technologies, add compatibility with newer GPU chipsets, or resolve different problems that might have been encountered.
When it comes to applying this release, the installation steps should be a breeze, as each manufacturer tries to make them as easy as possible so that each user can update the GPU on their own and with minimum risks however, check to see if this download supports your graphics chipset.
Forum Actions. Report Post. Yes, back on topic, I was having some crashing and freezing in Red Faction:Guerrilla. The game still crashes on exit sometimes, but that's hardly a disaster, is it? Haven't really tried it on other games Just Liberty City Episodes, which is fine , so can't comment any further. I even replaced my power supply to an Antec W but that didn't solve it. I've read lots of forums and some suggest its related to Realtek LAN drivers.
I think it's something to do with the PhysX 9. Currently uninstalled it and seems to be going fine. Will let you know when i get the GTX back. Same problem with GTX OK, lets run through the basics. Answer the usual questions. These are going to be basic for others to follow if usefull. Don't forget, you may have a PSU measured in KiloWatts but if it has multiple rails the power tends to get split. You should have more than 30amps on the 12v rail. Now thats for one card. If you are SLi'ing you need to have either 2 12v rails with more than 30amps or a lot more than 30 if you have only one 12v rail.
Make sure you use seperate molex lines for each card and that there is nothing else on the line. Fans may be OK but certainly not hard drives. Check that you have the latest motherboard BIOS.
Make sure you have it configured to use SLi and that it does support SLi and not crossfire only. Double check that you have 2 16xPCI-E slots. I mean FULL 16x slots. Check that you have the SLI link cable connected. Check the PSU connections to the motherboard. Most have a main power connection the long thin one with a tonne of cables as well as a 4 pin or 8 pin connection near the CPU socket.
If it can take an 8pin, make sure you connect it. Some PSU's have only a 4 pin connector. You can get molex and a 4 pin to 8 pin cables, although if you are already using molex cables to power your cards its not going to be enough! Some also have a molex header on the board for extra power to the PCI-E slots.
If you have it, connect it! Use a system monitor tool most motherboards come with one to keep an eye on the power levels across the board. Turn on logging and check the logs if you get a crash. If you see a sudden dip in power its a PSU issue. Problems can arise when your hardware device is too old or not supported any longer.
Description Free Download. If the driver is already installed on your system, updating overwrite-installing may fix various issues, add new functions, or just upgrade to the available version. Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones. In order to manually update your driver, follow the steps below the next steps : 1.
0コメント